Control Panels — Automation,
Monitoring & Process Control
Custom UL 508A industrial control panels with PLC, HMI, and SCADA integration — engineered, built, and tested in-house.
Built to Your Spec,
Tested Before It Ships
Every control panel is engineered to your process requirements and assembled in-house. Our team handles mechanical design, electrical schematics, PLC programming, HMI configuration, and full factory acceptance testing — so you receive a panel that is ready to connect.
- UL 508A listed — accepted across Canada and the U.S.
- Allen-Bradley, Siemens, Schneider — any major platform
- Custom schematics and as-built drawings included
- SCADA gateways: EtherNet/IP, Modbus, DNP3, IEC 61850
Control Panel Configurations
Explore our range of control panel configurations engineered for precision automation, motor control, and system-wide integration.
- Allen-Bradley, Siemens, or Schneider PLCs
- Touch-screen HMI with custom process screens
- Motor starter and drive integration
- Remote I/O with EtherNet/IP or Profibus
- UPS-backed control power
- Commented ladder logic and as-built drawings
- +Redundant PLC (hot-standby) configuration
- +Remote I/O expansion chassis
- +OT cybersecurity hardening (IEC 62443)
- +Panel air conditioning unit
- +Managed industrial Ethernet switch
- +Witnessed factory acceptance testing (FAT)
- Combination motor starters (full voltage & reversing)
- Variable frequency drives with bypass
- Overload relay and motor protection
- Soft-starter integration
- In-feed circuit breakers and fused disconnects
- Phase monitoring and fault indication
- +Energy monitoring per motor (kWh / demand)
- +Dynamic braking resistor assembly
- +Bus plug-in expansion modules
- +Arc flash mitigation relay (ARCTEQ)
- +Explosion-proof motor starters (Class I Div 1)
- +Remote monitoring via SCADA gateway
- PID loop controllers (temperature, pressure, flow)
- Analog and discrete I/O marshalling
- Signal conditioning and intrinsic safety barriers
- P&ID-matched termination layout
- RTD, thermocouple, and 4–20 mA inputs
- DCS gateway integration
- +Redundant I/O modules (1:1 hot standby)
- +Certified intrinsic safety barriers (Ex ia)
- +Historian / data logging module
- +Foundation Fieldbus or PROFIBUS PA segment
- +Explosion-proof stainless enclosure (Class I Div 1)
- +Third-party DCS integration and loop check
- Data acquisition across PLCs and IEDs
- Industrial-grade cellular / fibre gateways
- OT cybersecurity hardening (IEC 62443)
- Historian, alarming, and reporting
- Remote dial-in with role-based access
- Multi-site aggregation capability
- +Redundant communication paths (primary + failover)
- +Firewall / DMZ network segmentation
- +Mobile application dashboard
- +Offline fallback mode with local storage
- +Video surveillance integration
- +NERC CIP compliance documentation package
Built to Standard
Where Our Panels Are Deployed
- Water and wastewater treatment
- Oil & gas processing and pipelines
- Food and beverage manufacturing
- Mining and mineral processing
- Power generation and utilities
- Building automation and HVAC
- Transit and traction power
- EV charging depot management
Engineering to commissioning — one team.
We handle schematic design, PLC programming, panel build, factory testing, and site commissioning. One team, one scope, no handoffs.
View Commissioning Services →Frequently Asked Questions
Yes — our engineers write, test, and document ladder logic, function blocks, and HMI screens. We deliver commented, version-controlled code with full I/O lists and test records.
Yes. We support OPC-UA, Modbus TCP, DNP3, IEC 61850, and vendor-specific protocols. We've integrated with Ignition, Wonderware, Citect, iFIX, and custom DCS platforms.
Yes — FAT is standard on all control panel orders. Tests include power-on verification, I/O loop checks, HMI screen navigation, communication protocol handshake, and emergency stop circuits. Witnessed FAT available on request.
Request Control Panel Pricing
- Panel type and PLC platform preference
- I/O count and field device list
- Communication protocol requirements
- Enclosure rating (NEMA 1, 4, 4X, 12)
- Required delivery timeline
- Witnessed FAT requirements
Same-day lead time quote.
Speak directly with our engineers.
Our engineering team reviews every inquiry personally — no automated responses, no gatekeeping.
Request a Quote →Or call +1 (647) 616-2595See What We Can Build For You
Built in Canada — reach our engineering team directly for specs, quotes, and lead times.